Cannabis Farmers Making Use Of Modern Technology To Cut Costs, Improve Outputs

大麻种植者利用现代技术降低成本,提高产量

2021-07-22 12:31:07 RTTNews

本文共737个字,阅读需2分钟

Cannabis farmers all over the United States are making use of modern technology to bring down their water and energy use, thus lowering their labor costs and in the process, improving their yield and productivity. Some of the ways in which modern technology has been helpful for cannabis farmers are the following: 1) sensors, which help control irrigation and get the correct lighting. 2) systems, which can remotely control factors of a grow-room environment like temperature and humidity. 3) latest LED bulbs and smartphone-controlled technology to lower and raise the lighting and finally, 4) A product to control pests without chemical pesticides. Coming to the first example, nowadays cannabis farmers have different options of sensors, which help a cultivation operation manager to get to know the soil moisture using software, which can be easily seen on a computer or smartphone. So, the cannabis farmer no longer needs to lift a pot to check how much or little water a plant requires. Many cannabis farmers who opted for the sensor system have seen a drop of around 60 percent of water usage since after installing the sensors. These sensors notify farmers immediately when they sense that some portions of the plants lack adequate water in the substrate. Cannabis growers are increasingly making use of systems, which collect marijuana data from top to bottom. With the help of this knowledge, they get to know how much light and how much temperature the plant is requiring. With the use of the automated grow system, any sorts of adjustments can be made from any place having internet connection. Many cannabis farmers are switching to LED lights for their marijuana plants as these lights are known to double the size of the plants and brings about a lot of savings on the energy side. The LED lights do not give out as much heat as the high-pressure sodium bulbs usually farmers use so the system doesn't have to strain to keep the indoor temperatures down. Cannabis growers are also making use of crop-management technology, which doesn't depend on chemicals to avoid the use of harmful pesticides. In this technology, a natural type of tea with antiviral, anti-fungal and anti-pathogen properties is used so that there is no need to spray on any other foliar or powdery mildew preventative solutions. The solution also doubles as a cleaner for the entire grow room in place of another solvent such as bleach. All these products are replacing the traditional pesticides with healthier options. For comments and feedback contact: editorial@rttnews.com Health News
美国各地的大麻种植者正在利用现代技术降低他们的水和能源使用,从而降低他们的劳动力成本,并在此过程中提高他们的产量和生产率。现代技术帮助大麻种植者的一些方式如下:1)传感器,帮助控制灌溉和获得正确的照明。(2)远程控制生长环境中温度、湿度等因素的系统。3)最新的LED灯泡和智能手机控制技术来降低和提高照明,最后,4)一种不使用化学杀虫剂的产品来控制害虫。第一个例子是,现在大麻种植者有不同的传感器选择,这些传感器帮助种植运营经理使用软件了解土壤水分,软件可以在计算机或智能手机上轻松看到。因此,种植大麻的农民不再需要举起一个罐子来检查植物需要多少水。许多选择传感器系统的大麻种植者在安装传感器后,用水量下降了约60%。当农民感觉到植物的某些部分在基质中缺乏足够的水分时,这些传感器会立即通知他们。大麻种植者越来越多地使用自上而下收集大麻数据的系统。在这些知识的帮助下,他们知道了植物需要多少光照和多少温度。随着自动增长系统的使用,任何类型的调整都可以从任何有互联网连接的地方进行。许多大麻种植者正在为他们的大麻植物改用LED灯,因为众所周知,这些灯可以使植物的大小增加一倍,并在能源方面带来大量节省。LED灯不会像农民通常使用的高压钠灯泡那样发出太多的热量,所以系统不必为保持室内温度而紧张。大麻种植者也在利用作物管理技术,这种技术不依赖化学物质,以避免使用有害杀虫剂。在这项技术中,使用了一种具有抗病毒、抗真菌和抗病原体特性的天然茶叶,因此不需要喷洒任何其他叶面或白粉病预防溶液。该溶液还同时作为整个生长室的清洁剂,取代了另一种溶剂,如漂白剂。所有这些产品都在用更健康的选择取代传统的杀虫剂。 如需评论和反馈,请联系:editorial@rttnews.com 健康新闻

以上中文文本为机器翻译,存在不同程度偏差和错误;偶尔因源网页结构局限,内容无法一次完整呈现。请理解并参考原站原文阅读。

阅读原文